English
Arabic
From the manufacturer
- Will not dissolve hard foam
- Safe for Styrofoam
- Works well with Plastics and expanded polystyrene
Weldbond
Bonds Most Anything
- Weldbond is a universal adhesive for gluing a variety of materials. Wood, tile, glass, plaster, cork, slate, brick, concrete block, linoleum, clay tile, ceramics, fabrics, and more.
 |
 |
 |
 |
|
|---|---|---|---|---|
| Wood | Tile & Ceramics | Glass | Concrete & Masonry | |
| Features and Benefits | Sets in 20 minutes, achieves strong bond in 1 hour, cures in 24 hours | Perfect for clay, cork, quartz, slate, glass stone, or composite materials like Corian tile | Dries crystal clear! | Weldbond is both a sealer and/or priming coat for porous surfaces like concrete, masonry, and brick |
| Bet you didn't know this | Bonded joint is paintable and stronger than the wood | Tiles can be laid on flat or uneven surfaces | Can use on glass-to-glass projects or glass to many other surfaces | Great for sealing in concrete dust in basements and garages |
Frequently Asked Questions
1. What sizes are available for weldbond?
Weldbond is available in numerous sizes for various applications and project needs.
Bottles: 160 ml/5.4 us floz, 420 ml/14.2 us floz,, 3l/101 us floz tubes: 60 ml/2 floz.
2. Can I keep my weldbond bottle outside in the garage? Will it freeze?
Weldbond should be protected from the cold as it will freeze. Once frozen, this product loses all adhesive capabilities. It should be stored above 50°f/ 10°c at all times. Also, after the container has been opened, ensure it is closed tightly after each use.
3. What is the shelf life of weldbond?
Weldbond typically has a shelf life of 5 years. If the product is starting to solidify, it can be restored by adding just a little bit of water. We advise the consumer to give the container a good shake prior to every use.
4. Is weldbond non-toxic?
Weldbond has been tested to be non-toxic. Weldbond conforms to astm d4236.
5. Where can I find the weldbond msds?
You can request one at the official website.
6. Is weldbond tested on animals or created with any animal by-products?
Weldbond is not tested on animals and does not contain any animal by-products. This product is vegan friendly.
7. What does the ul/ ecologo stand for?
The ecologo certification program was aquired by ulenvironment, a division of ul (underwriters laboratories) in 2010.Ecologo certification is based on multiattribute, life cycle–based standards. All products certified to an ecologo standard must meet or exceed each of the listed criteria before receiving the mark.
Product certified for reduced environmental impact. View specific attributes evaluated: ul2762.
8. What is meant by porous and non-porous surfaces? How can I tell which is which?
A porous surface means that the material is full of tiny holes that allow fluids or gases to pass through, non-porous surfaces do not allow anything to pass through.
Porous surfaces must be sealed with 1 part weldbond to 5 parts water. Porous surfaces can be determined by dropping a small amount of water on surface. If water is readily absorbed, surface is porous. If water beads on the surface, it is non-porous.
Note: the sealing mixture of 1 weldbond to 5 water should not be used where water alone would have an adverse effect, i.E. On water soluble fillers.
9. Are there any materials that weldbond can’t glue?
Some types of plastic, rubber and cast metals will not produce a bond with weldbond, specifically polyethylene, unbacked vinyl, p.V.C., teflon, polypropylene, vinyl to vinyl, cast iron, cast aluminum. Weldbond is not intended for marine applications. It is not recommended for use on exposed exterior surfaces. Garage interiors are acceptable.
Note: do not use when bonding containers designed for use with, or subject to, hot liquids.
10. How do I remove weldbond from my clothes, carpet, curtains or anything else?
Weldbond is a water based glue therefore if the stain/spill is recent we recommend using cold water, not hot water. However, once the glue has set it is very difficult to remove therefore be sure not to wear your favourite clothes while using weldbond, just in case!
11.How do I dissolve weldbond?
Weldbond can quickly be dissolved with acetone. Because weldbond is water based it can also be dissolved with a soaking of, or submersion in water. This will dissolve a bond.
12. Can weldbond be tinted?
We have many craft users that tint weldbond with a wide variety of creative methods, including tea, paint, nail polish and other creative methods. We always recommend the consumer to test this creation on a small piece prior to proceeding with the full project. Some compounds utilized for tinting could have an adverse impact on the makeup of the weldbond.
13. What kind of paint will seal weldbond
we recommend latex and acrylic paints for the best results.
14. Can weldbond be utilized on external applications?
Weldbond can be used on external applications as it is weatherproof. However, weldbond is not waterproof, it is water resistant. Weldbond should only be used on external applications if it is free of standing water that could cause it to freeze or if it is being used on a vertical surface where water cannot pool on top.
15. Can weldbond be utilized on marine applications?
Weldbond is not intended for marine applications. It is not recommended for use on exposed exterior surfaces.
16. My weldbond project bond has not dried clear.
A. Why not?
Most like too much adhesive was used. Another possibility could be that if you are gluing a large surface, air cannot get to the weldbond in the middle of the bond. We do suggest that if you are gluing large pieces, you apply the adhesive to the exterior rim and not the centre as a proper bond might not take place.
B. What can I do about it?
Apply heat. If weather conditions permit, set the project in the sun. For large glass surfaces, glue the edges, but stay away from large amounts of glue through the middle of the surface. Weldbond air cures.
17. Does weldbond release any fumes?
Weldbond does not release any fumes no matter if it is in liquid or solid state.
18. What is the set-up time?
The set-up time for tackiness will vary with humidity, but is roughly five minutes for most projects. It will be somewhat longer in humid conditions.
19. What is the cure time?
Weldbond becomes tacky quickly and will dry within the hour on porous surfaces. Provides a strong bond within 24 hours and tremendous strength within a few days. The sealing mixture of 5 parts water to 1 part concentrated weldbond dries in approximately 1 hour.
20. What are the physical characteristics of weldbond?
Solid content 51 – 53 %.
Viscosity 10,500 – 12,000 cps.
Ph 4.5 – 5.5.
Particle size medium, average 1.5u.
Particle charge nonionic.
Specific gravity 1.095.
Residual monomer 0.5% maximum.
Odour slight, characteristic.
Colour wet white.
Colour dry clear.
Flexibility flexible.
Water resistance good.
Appearance slightly hazy.
U.V. Resistance very good.
g.T. (glass transitional) spec is 5+.
21. Is this a pva adhesive or a pvc adhesive?
Weldbond is a pva adhesive . (poly vinyl acetate based adhesive).
22. Is there any formaldehyde preservative in this adhesive?
Weldbond does not contain any formaldehyde preservative. The ul/ecologo certification states that weldbond has been created without: latex, aromatic or halogenated solvents, formaldehyde, toxic metals, including but not limited to cadmium, hexavalent chromium, lead, and mercury, or their compounds.
23. Is there any phthalates in this product?
Weldbond is created without the use of phthalates and is therefore free of phthalates.
24. What is the voc content of this product?
Weldbond contain less than 1% vocs by weight.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Chat with Us
