English
Arabic
From the manufacturer
Copper Core Spark Plugs
Good
Guaranteed to deliver quick starts, good fuel economy and smooth acceleration. Autolite Copper Core plugs are your industry standard.
- Copper-glass seal bonds insulator, terminal post center electrode together; ensures full required voltage at spark gap; gas-tight seal (100% leak-proof)
- Multi-rib insulator reduces danger of "flash-over"
- One-piece terminal post adds strength
- Resistor reduces radio frequency interference (RFI) and electrode erosion
- Cold-formed steel shell precision rolled threads
- Full copper core electrode provides better performance in all conditions
Platinum Spark Plugs
Better
Provides a center wire platinum firing tip. Benefits include: reduced gap erosion, fewer misfires, better performance and more durability. Guaranteed for four years.
- High nickel alloy side electrode maintains precise gap
- Full platinum tip assures virtually no gap erosion
- Necked-down center electrode fires quicker and cleaner with less voltage for easier starts, quicker acceleration, and improved fuel economy
Double Platinum Spark Plugs
Best
Features platinum-to-platinum firing. Virtually eliminates gap erosion, reduces misfires, and provides improved durability. It's the superior-performing spark plug providing preferred technology for DIS engines. Guaranteed for five years.
- High nickel alloy side electrode
- Full platinum tips
- Necked-down center electrode
- Full copper core center electrode
Iridium XP Spark Plugs
Elite
These spark plugs are one of the brand's most technologically advanced spark plugs ever. With an iridium-enhanced 0.6 mm finewire design and proprietary platinum sidewire technology, these spark plugs provide better durability and a more focused ignition for better overall ignitability and optimum performance. Guaranteed for seven years.
- Iridium-enhanced center electrode
- Patented, platinum sidewire technology
- 0.6-mm finewire design
- Nickel-plated shell
Installation Instructions
Autolite highly recommends that you consult with your vehicle’s owner’s manual for any specific instructions for changing the spark plugs. Engines can vary widely by make and model. These instructions should be considered for general guidance only.
Replacing spark plugs can be a simple job, if you take things one step at a time. Given a basic understanding of mechanical matters, here's a guide to the proper procedures in changing spark plugs.
1. Carefully remove the spark plug wires. Grasp the plug wire boot, twist about one-quarter turn to break the seal, then lift straight off. Use plug boot pullers if the boot doesn't break free easily. Number plug wires with tape as you remove them to avoid crossing them. (illus. 1)
2. Loosen each spark plug so it can be removed. Clean the seat area with a blast of compressed air, or by blowing through a soda straw. This prevents dirt from falling into the combustion chamber when the old plugs are removed. (illus. 2)
3. Remove the plugs and line them up in cylinder order. Inspection of the firing ends of the plugs can identify a number of engine problems that may need correction. (illus. 3)
4. Gap new plugs as recommended in your owner's manual or a Spark Plug Catalog. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If it's too loose or too tight, reset the gap.
5. Screw new plugs in by hand until tight. If the plug starts to go in hard, use a thread chaser to clean the threads. Use a torque wrench to tighten the spark plugs following the manufacturer's recommendations, or refer to a torque chart in the Spark Plug Catalog. If you don't have a torque wrench, see the bottom of the torque chart for hand tightening recommendations.
6. Replace spark plug wires in the correct order. Check to see if the boots are brittle or cracked, and if there is corrosion on the connector inside the boot. If any of these conditions are present, the spark plug wire should be replaced.
7. Start the engine. If it misfires or idles roughly, the wires are crossed or not connected to the plugs correctly. Check the firing order and connections closely.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Related Products
Chat with Us
