Product Tags

Throttle Position Sensor - TPS - Replaces AP63427, 53031575, 53031575AH - Fits Dodge Ram 2500, 3500 1998-2004 - 5.9L Cummins Engine 98, 99, 01, 00, 02, 03, 04 Accelerator Pedal Position Sensor APPS

Throttle Position Sensor - TPS - Replaces AP63427, 53031575, 53031575AH - Fits Dodge Ram 2500, 3500 1998-2004 - 5.9L Cummins Engine 98, 99, 01, 00, 02, 03, 04 Accelerator Pedal Position Sensor APPS

Availability: In stock

Product type:

Vendor: PartLimit

$26.99 Regular price ~~$53.99~~

Quick Overview Product Description The throttle position sensor gives information to the ECM (Engine Control Module) about the position of the pedal determining the speed at which the driver is...

$26.99 Regular price ~~$53.99~~

Qty:

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Product Description

The throttle position sensor gives information to the ECM (Engine Control Module) about the position of the pedal determining the speed at which the driver is pushing on the accelerator pedal. It is located at the front driver side of the engine inside the bell crank assembly housing in between the cylinder head and batter.

If your Dodge Ram is having problems in idling, speed falls off suddenly, check engine light pops up you are getting codes P2121, P0121, P0122, P0123 then you may have a problem with your throttle position sensor.

This replacement TPS manufactured by AA Ignition can be easily installed. In order to properly install the replacement sensor be sure the voltage of the TPS is set to 0.55v+ before locking in its position. Once set, turn the engine on and slowly push the accelerator pedal to the floor and back (only once) to make sure that the ECM learns the TPS calibration. More installation details are available upon request.

Fits the Following Vehicles

1998 - 2004 Dodge Ram 2500 5.9L
1998 - 2004 Dodge Ram 3500 5.9L

Replaces Part Numbers:

53031576
53031576AD
3970085
AP63427
53031575
53031575AH
3970084
AP63428
56028184A

Product Features:

Replaces factory throttle position sensor also known as accelerator position sensor AAPS
Solves common problem involving engine idle and acceleration
Resolved common fault codes including P2121, P0121, P0122, P0123

Locating the Throttle Position Sensor (TPS) or Accelerator Pedal Position Sensor (APPS)


Locate the Rounded Black Cover The throttle position sensor is housed within a black cover located on the driver side of the engine bay between the cylinder head and the battery tray. Once this cover is removed the TPS and throttle linkage will be exposed.	Remove 6 Bolts Once this cover is removed the TPS and throttle linkage will be exposed. In order to access the TPS remove the 6 bolts as shown above. This will release the throttle linkage bracket.	Remove 2 Screws Securing the Sensor With the throttle linkage bracket unbolted you can access the TPS and remove it by removing the 2 screws as shown above. When installing the new TPS use a multi-meter & verify the voltage on pin #3 (green wire) reads 0.580-0.670 volts when the throttle is at idle. If not adjust the idle adjustment screw (blue arrow in picture 2)

Experience the AA Ignition Difference!


ASE Certified Technicians Installing parts on you vehicle can be difficult and we understand. That's why we have certified technicians on staff to assist you with installation or even properly diagnosing your car. Our technicians will even provide the factory repair manual to make installation easier for you.	Strict Quality Control All of our sensors undergo strict quality control not just before shipping but throughout the production process. During each step of production multiple quality control checks are performed to insure each and every part lasts for years to come.	An American Small Business AA Ignition is a division of GWA Auto Parts and we are proud to be an American Small Business. Located in sunny South Florida and founded by long time car enthusiasts, AA Ignition takes pride in providing quality products at an exceptional value.

This is a compatible replacement part manufactured by AA Ignition. This throttle position sensor is NOT a genuine Dodge part. Dodge and their associated vehicle models and part numbers are used in this listing only to identify the vehicles this throttle position sensor fits.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.