Ashimori Compatible With 2001-2003 Toyota RAV4 2.0L Auto & Manual Transmission Engine Motor Mount Set A7271 A7246 A62010 A4265
Ashimori Compatible With 2001-2003 Toyota RAV4 2.0L Auto & Manual Transmission Engine Motor Mount Set A7271 A7246 A62010 A4265 Ashimori Compatible With 2001-2003 Toyota RAV4 2.0L Auto & Manual Transmission Engine Motor Mount Set A7271 A7246 A62010 A4265 Ashimori Compatible With 2001-2003 Toyota RAV4 2.0L Auto & Manual Transmission Engine Motor Mount Set A7271 A7246 A62010 A4265 Ashimori Compatible With 2001-2003 Toyota RAV4 2.0L Auto & Manual Transmission Engine Motor Mount Set A7271 A7246 A62010 A4265 Ashimori Compatible With 2001-2003 Toyota RAV4 2.0L Auto & Manual Transmission Engine Motor Mount Set A7271 A7246 A62010 A4265 Ashimori Compatible With 2001-2003 Toyota RAV4 2.0L Auto & Manual Transmission Engine Motor Mount Set A7271 A7246 A62010 A4265

Ashimori Compatible With 2001-2003 Toyota RAV4 2.0L Auto & Manual Transmission Engine Motor Mount Set A7271 A7246 A62010 A4265

: In stock

: 15725951

: PartLimit

$215.99 $431.99

Product Description Package Content Front Motor Mount: A7271 / EMT9081 / 9081 / EM-9081 Front Right Motor Mount: A7246 / EMT9432 / 9432 / EM-9432 Rear Mount: A62010...

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Category:

Tags:

Product Description

5 steps to replace an Engine Mount

Step 1 Support the engine Raise the car with floor jack, you may use a piece of wooden block in between the floor jack and engine oil pan.
Step 2 Loosen the busted mount Loosen the engine mount bolts and nuts using a long extension and universal joint. They’ll be tight, so if you are having trouble, apply penetrating spray lubricant before trying again. Remove busted mount.
Step 3 Comparison Compare the old and new mounts, ensure they are identically size and mounting point are accurate.
Step 4 Install the new mount Put in the replacement straight forward, torque mounting nuts and bolts.
Step 5 Verify the repair Lower and remove floor jack, remove car from jack stand, engage emergency parking brake and run through gears to check for excessive engine movement and vibration.
Ashimori Engine Mount

ASHIMORI, a premium brand of automotive rubber parts

Comprehensive Product Range, Premium Quality Materials, Superior Quality Control, Experienced Manufacturing & Servicing Team lead us to find our niche in the market.

Began from a very humble local Malaysian startup in 1984, we have developed into scalable operation to provide complete and quality solutions to automotive industry.

At present, we are well noticed in over 80 countries across 5 continents. Our products are highly sought after in Central and South America, Europe, Russia, Middle East, ASEAN Countries, Australia, New Zealand and many more.

ASHIMORI exceeds your Demand and Imagination

Our products are constructed with high standard:

(1) OEM QUALITY: Product meets OEM quality and specification, designed by 3D scanning software.

(2) SPECIALITY: Natural rubber is tensile strength tested, which measured by rheometer that following international standard for viscoelastic properties.

(3) COMFORT: All rubber material is manufactured in Malaysia, matches OE ensuring maximum occupant comfort by transfer of vibration frequency at all engine.

(4) SAFETY: Rubber and metal are bonded by special chemlok adhesive coating, providing excellent abrasion resistance and durability under the most extreme conditions including vibration, exhaust heat, and solvents.

(5) QC: Finished product are going through robot welding technology and double QC procedure.

Frequently asked questions about engine mount

Q1: What happens if engine mounts break?

A: The main function of engine mounts are ensuring the engine to attach securely in order to prevent vibration caused by engine operation from transmitting to car and units. Therefore, if the engine mounts are damaged, all vibrations and bumps will transmit to the car's body. This will affects driving comfort and shorten the working lifespan of some of the car parts.

Q2: Can you drive a car with a broken motor mount?

A: Technically you might be able to drive your car with a bad engine mounts, but it is dangerous. When the engine starts to move around, even just slightly, it can lead to engine issue, chassis/frame damaged and handling problem. If your engine mount are damaged completely instead of loose and cracked, it might cause the engine shift or bounce violently causing some of the parts fly off when you are driving at a high speeds.

Q3: Is it hard to change engine mounts?

A: The complexity of this procedures are depends on the vehicle’s design, engine bay layout as well as engine’s location of the part to be replaced. For example, upper mounts are located in a quite accessible area, so their replacement usually causes no troubles. To replace the lower mounts, you will have to support (jack up) the engine. You may refer to the “Steps to change engine mounts”, it will help you to tackle the replacement yourself.

Q4: Why do engine mounts go bad?

A: Over times, leading to the signs of rubber elements of the parts become harden, losing elasticity, and cracked. Exposure to oil, coolant, and other technical fluid speeds this process up. That is why leaks in the engine compartment may significantly reduce the service life of engine mounts. Moreover, the parts may break prematurely because of improper installation. Other factors detrimental to these components include aggressive driving style (manual transmission), driving on rough roads, accidents, and suspension malfunctions because of which the mounts have to work under increased loads.

Q5: How to know when to replace motor mounts? Any symptom of a bad / damaged motor mounts?

A: Impact noises / Significant vibrations / Misalignment – engine shift around or dropping to one side while you driving / Damaged fan belts or radiator hoses / Damaged to the engine

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.