 |
BEAMTECH FANLESS CSP LED HEADLIGHT BULBS ALL-IN-ONE CONVERSION KIT
Replace High Beam,Low Beam,High and Low Beam,Fog Light
50w/set,8000lm/set,6500k |
|
Description:
--CSP LED headlights: Imported CSP chips,high optical density & low heat resistance,enhance light efficiency up to 95%. brilliant pure white lighting.Without ballast.
--Fan-less design: Advanced heat conduction system+unique grooved heat sink fins keep the light bulb in appropriate working temperature,No noise caused by fan.
--Error_free,Zrro warm-up: Work with most vehicle's computer system without error.light uo your road instantly without warming up.
--Rain-Resistant: Better works on rainy days and even in the harsh conditions.
Features:
Bulb Size:H11 H9 H8
Other Available High-Low Beam Bulb size: 9004,9007,H4,H13 (Replace high beam and low beam )
Other Available Single Beam Bulb size: 880,9005,9006,H1,H3,H7,H11 (replace high beam or low beam or fog light,Depends on the car)
Power: 50W/set(25W/bulb)
LED Quantity: 6Pcs / 12Pcs CSP LED Chips (each bulb)
Luminous Flux: approx.8000lm/set(4000lm/bulb)
Operating Voltage: DC 9-32V (fit 12V/24V vehicle)
Color Temperature: Cool White 6500K
Material: Aviation 6063 Aluminum Profile
Operating Temperature: -40-80 Degree Celsius
Waterproof rate: IP65 Water and Dust Seal
Life time: Above 30,000 hours
Warranty:3 Years
Package includes:
2Pcs BEAMTECH H11 LED Headlight Bulbs
English User Manual Notice 1:The ebay filter system and the "Compatibility" table on Ebay may not be 100% accurate or up to date.If you don't know which bulb fit for your car,Please contact seller via eBay message. All led bulbs have heat sink/fan,please make sure there is enough space behind the headlight housing (about 45mm) for the heat sink of led headlight. Notice 2:(1)These led headlight bulbs kit only replace Factory Halogen bulbs, they won't replace Factory HID bulbs.
(2)9005/HB3 led bulbs also can replace Fog Light 9145 9140 H10,but before replacing,will need to do a little modification on the retainer holder of led bulbs,then can twist to lock the bulb into place.
(3)9006/HB4 led bulbs also can replace single beam 9012.
(4)This LED bulb 880/H1 is NOT fully plug & play for some vehicles,some modification may be needed,need connect them to factory positive and negative to get power.(or contact seller )
(5)For some vehicle,such as Mazda, BMW, Dodge,Hyundai,Kia, etc, will need extra H7-retainer ring/holder to install the H7 led headlight bulbs on headlight housing.
(6)9004/9007 led headlight bulbs are plug and play for most vehicles, but for some other vehicles, if they have original locking ring(adapter) for 9004/9007 halogen bulb,they may need to modify the original locking ring(adapter) to lock the 9004/9007 led headlight bulbs on headlight housing, if you have this issure, please contact us for help.
|
Q1. Will these led bulbs fit for my car?
The "Compatibility" table on Ebay may not be 100% accurate or up to date.
If you don't know the part number of your existing bulb,Please follow below steps to match correct led bulbs before purchase to avoid mistake.
(1)Go to "sylvania-automotive" website, find the part number of stock bulb on your vehicle.
(2)Take a look in your vehicle handbook or Take out your existing bulb from your vehicle,verify the part number of the bulb,match the part number on our listing.
(3)Please contact us via eBay message to tell us your vehicle information(Make,Model and Year),then we will help match right bulb.
Q2:How to install these led bulbs and get good pattern?
A:Should be installed vertical, and the diodes are at 9 and 3 o'clock position.
(about 9007/H4/H13 hi-lo beam led bulbs,the high beam is at the bottom,the low beam is at the top)
Each car's headlamp reflector is different ,so for some vehicle,9004/9007/H4/H13 led bulbs will need adjust the angle to get the good pattern. first let the headlight shines toward the wall,remove the screws from the bracket and install the led bulbs into the headlight housing and turn the bulb slowly to find the best pattern,then twist back the screws of LED bulb's bracket to fix.Sometimes after finding the best angle,maybe you will need to drill a new hole manually to fix.
Q3:After installing, why neither side led bulbs turn on or lighting up? or both sides led bulbs are flickering ? or have error code on car computer?
A: (1)First,Polarity Problem.unlike halogen bulbs, LED are polarity sensitive.Different car manufactures have different polarity setup,if led bullbs don't turn on or lighting up, Pls check for a polarity mismatch,disconnect the bulb and flip the socket in order to reverse the polarity to install.
(2)Second,Compatible Problem(Voltage Problem).the vehicle's computer system is sensitive to the led headlight bulb (the power of the led headlight bulb is lower than the halogen ones). Therefore,it may be occur compatible problem(flickering,error code,radio interference,headlamp fog light interference,high beam and low beam interference,etc), after replacing the led headlight on some vehicle,e.g. Audi, Mercedes, Ford, Volkswagen, Volvo, Jeep Dodge and Ram etc, then will need to add resistor/decoders to solve these compatible problems.
|
Payment
(1)We accept only Paypal for both domestic and international.
(2)Please don't bid if you don't intend to buy. If buyer want to delay the payment because of financial problem, please contact me by the ebay message within 3 days.
(3)Notice:buyers are responsible for all additional customs fee, brokerage fee,duties,and taxes for importation into your country. |
Shipping
(1)We will ship your order via USPS from California within 24 hours after receiving your verified payment.
(2)Please double check shipping address and other details.We will ship to the shown address on your PAYPAL Payment notice,Please confirm your shipping address in the PayPal Account.
| Shipping Method |
Shipping Destination |
Shipping Time |
| USPS |
USA |
3-6 working days |
| USPS |
CANADA |
5-10 working days |
|
Return
(1)All return requests must be submitted through your eBay account.You have to obtain a RMA (ReturnMerchandise Authorization) number from us, and have the RMA number written on the return package. (2)Buyers pay for return shipping fee. (3)Items to be returned must be in resalable condition.
|
Customer Service
(1)If you have any question,please send us eBay messages,our customer service will make best effort to help you with the issues.
(2)Our office hours are MONDAY - FRIDAY,all eBay messages take us around 24 hours to respond.
(3)Negative feedback will not help resolve any problems you have, please send us eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues. |
|
English
Arabic
Chat with Us
