English
Arabic
Product Description
Failed Oil Cooler?
A common failure point in high mileage medium and HD Diesel Engines is the Oil Cooler. When this occurs, the engines coolant system becomes
contaminated by engine oil. This will turn the engine coolant into a mud-like mixture and must be cleaned out when replacing the Oil Cooler.
Solution: Two pints of Irontite Thoro-Flush will clean and strip the oil out of the engine cooling system with a single flush following the product instructions.
Plugged Heater Core?
Many of today’s vehicles are manufactured with very tight heater cores that can become plugged over time. It is not uncommon for a 4-year-old vehicle, if the coolant system is not flushed annually and recharged with new coolant, to simply plug. #1 symptom is no heat.
Solution: One pint of Irontite Thoro-Flush will clean, unplug and
restore a heater core to a like-new condition with a single flush
following the product instructions.
Dex-Cool Gelled in Coolant System
Both GM and Chrysler began using Dex-Cool extended life antifreeze in their vehicles beginning in the mid-90’s. Dex-Cool, when mixed with non-Dex-Cool Antifreezes, will create a chemical reaction turning the cooling system coolant into a thick gel. Symptoms will be engine overheating and loss of heat from the vehicle’s heater. Getting this Dex-Cool ”mud” out of a vehicle is a difficult and time consuming job.
One pint of lrontite Thoro-Flush will clean, unplug and restore a coolant system to a like-new condition with a single simple flush. Thoro-Flush can be used with a flushing machine or simply as a manual flush. This allows you to recharge the system with proper coolant mixture, which will stop the vehicle from overheating and restore the passenger heating system.
Clean Fuel Tanks and Cooling Systems with Thoro-Flush
Over 30% of new Fuel Pumps fail because the installer did not clean the fuel tank properly. Fuels with Ethanol cause a build-up of Ethanol gel in fuel tanks. Older steel tanks will have scale and rust that can cause a new fuel pump to fail. Bio-Diesel leaves hard-to-remove residue in the fuel tanks that cause problems throughout the fuel system.
Most fuel pump and module issues are linked to debris or contamination in the fuel tank that may have accumulated over time, or during the removal and replacement procedure. Fine particulate
contamination can clog the strainer causing high electrical demand on the fuel pump, and if ingested, can result in premature wear within the pumping section. Both failure modes result in reduced performance,
premature failure, or at worst case, a walk home. Fuel pumps and modules may be returned due to installers not cleaning the gas tank properly, causing repair costs to skyrocket.
The vehicle's original fuel pump was installed into a clean tank, so to ensure the same level of performance, the new pump should go into a clean tank as well. An industry research study conducted by IMR Test Labs indicated that only 18 percent of technicians perform the fuel pump replacement procedure correctly by thoroughly cleaning the fuel tank, fuel filler and strainer if needed. That would indicate a full 82 percent of aftermarket fuel pumps purchased are being installed into tanks that are potentially contaminated.
One pint of lrontite Thoro-Flush will clean and strip the Ethanol Gel, Scale, Rust, Bio Diesel Residue along with other contaminates out of a fuel tank with a simple flush. Follow the directions on the bottle for Fuel Tank Cleaning.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Related Products
Chat with Us
