English
Arabic
Product Description
About PartsSquare
PartsSquare is one of the largest radiator cooling fan accessories in the auto parts aftermarket.
PartsSquare can offer an extensive line of High -quality ready to install radiator cooling fan accessories.
PartsSquare will continue to research and discover, manufacturing, supply and distribution of our products that ultimately delivers value to customers and society.
Fitment
- Fit : 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES
- Note:For the two red wires,please connect the long red wire to the fan and the short red wire to the battery.
- 1.Mount the relay under the hood in a convenient location as to the fan as possible.
- Notice:Don't use the teflon tape or thread compoud on the thermostat or adaptor.For proper operation,the thermostat must ground threough the threads to the engine and the engine must be ground.
- 2.Install thermostat into the head or intake manifold.Route the black wire to thermostat and cut to length.Crimp the red terminal onto the black wire and attach to thermostat.
- 3.Route and connect the red wire to the fan "+" terminal or power wire coming from the fan motor printed "to electric fan".
- 4.Mount the circuit breaker provided in a convenient location as close as possible to whichever power source(battery or large terminal on the starter solenoid)you are using for the fan relay.
- 5.Neatly route the red wire from the relay to one side circuit breaker installed in step 5. Cut to length and install using a small yellow ring terminal .With another small yellow ring terminal take the remaining red wire and connect the unused post on the circuit breaker to the battery source.This wire is printed"to battery/constant hot"
- 6.Route the brown wire to the ignition switch or the fan switch whichever is more convenient.
- Installation tips:
- 1.Turning off the engine, replace the new cooling fan temperature switches after the water in engine radiator cooled to the room temperature.
- 2.Avoid the external high heat source after installation.
- 3.Avoid sprinkling water on surrounding auto parts during the installation.
- Package include:
- 175-185 degrees Cooling fan thermostat relay switch kit
How to replace it?
- SINGLE SWITCH MODELS
- 1.Locate the cooling fan switch near the thermostat housing on the left side of engine behind the distributor assembly. The switch wire colors should be green and black.
- 2.Disconnect the wire terminal from the cooling fan switch.
- 3.Allow the engine to reach a coolant temperature of 196-203°F (91-95°C).
- 4.Using a suitable ohmmeter or continuity tester, check for continuity between the two fan switch terminals. The fan switch should have continuity (switch closed) at the above temperatures. The switch should have no continuity (switch open) when the temperature drops between 5-15°F (3-8°C) from the temperature that the switch first had continuity (switch closed).
- 5.If the switch does not operate within the range of the supplied information, allow the engine to cool below 100°F (37°C) and replace the switch.
- WARNING
Submerging the electric cooling fan switch below the threads could damage the component. Coolant must be used for this test as the boiling point of water is below the temperature required for testing some of the sensors. Perform this procedure in a safe and well-ventilated area. Do not breathe any fumes from the heated coolant. Wear eye protection and use care to not come in contact with any of the heated components. Do not use a heating device that produces an open flame.
PartsSquare's cooling fan accessories
Not remanufactured or rebuilt.
High Quality Replacement Part.
Exact Fit for easy installation.
100% Brand New and tested prior to leaving the factory.
Exact Fit
Qualified: ISO/TS 16949.
After Replaced with PartsSquare:
Radiator Fan system working more stable when you driving.
Enjoying!
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Related Products
Chat with Us
