English
Arabic
From the manufacturer
 |
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|---|
| 1200 Series | 600 Series | 4200 Series | NX25 | 700 Series | 300 Series | |
| Voltage | 12V | 115V | 12V | 12V, 24V, 115V, or 230V | 115V | 230V |
| Flowrate | 15 GPM | 15 GPM | 20 GPM | 25 GPM | 20 GPM | 35 GPM |
| Discharge Pressure | 16 PSI | 16 PSI | 16 PSI | 21 PSI | 23 PSI | 26 PSI |
| Motor HP | 1/4 HP | 1/6 HP | 1/4 HP | 1/3 HP | 1/3 HP | 3/4 HP |
| Motor RPM | 2600 RPM | 2000 RPM | 2600 RPM | 400 to 3500 RPM | 1725 RPM | 1725 RPM |
| Current (Max) | 20 amps | 2 amps | 20 amps | 15 to 30 amps | 5.5 amps | 4.9 amps |
| Inlet Size | 1" | 1" | 1" | 1 1/4" | 1 1/4" | 1 1/4" |
| Outlet Size | 3/4" | 3/4" | 1" | 3/4" or 1" | 1" | 1" |
| Discharge Head | 37' | 37' | 37' | 48' | 53' | 60' |
| Suction Lift | 6.5' | 6.5' | 6.5' | 14' | 15' | 18' |
|
|
|
|
|---|---|---|
Rotary VaneRotary vane technology is a positive displacement (fixed volume) pump design that utilizes an offset rotor with sliding vanes that rotates on a motor shaft inside the pump. The vanes move outward against the pump cavity to form individual chambers (positive displacement). Fuel enters into the pump cavity through the inlet port on the rotor side where the vanes are fully extended. As the rotor turns, the vanes collapse inward creating the pressure that forces the fuel into the discharge port and through the hose. Advantages of rotary vane technology…..
|
Suction LiftThe maximum suction lift rating refers to the maximum vertical distance that a pump can lift fuel out of a tank. On rotary vane pumps, suction lift is created due to the offset of the rotor in the pump cavity, which increases the volume in the chamber between the vanes, thus lowering the pressure on the pump’s inlet. Atmospheric pressure, which is now greater than the inlet pressure in the pump, moves the fuel from the tank to the pump cavity (self-priming). Suction lift is determined by the pump specifications, the type of fuel, and the altitude of the location where the pump is installed. Higher altitudes reduce the suction lift of a pump due to the reduced atmospheric pressure. To achieve maximum suction lift, the inlet plumbing should be as straight as possible with no elbows or bends in the line. Accessories, such as filters, should not be installed on the inlet side of the pump. Valves should be set with minimum spring pressure and must contain a pressure relief valve. |
Discharge PressureDischarge pressure refers to the systems pressure while dispensing. It effects flow-rate based on the pump’s design - the lower the discharge pressure, the higher the flow-rate. Variables that increase discharge pressure/decrease flow-rate:
To lower discharge pressure/increase flow-rate, remove or limit restrictions. Examples include, moving from a 10 micron filter to 30 micron filter, changing from a 800 series to a 900 series or TT10 series, limiting the use of elbows in system design, or increasing the diameter of your discharge hose/pipe. |
|
|
|
|
|
|---|---|---|---|
700KTF2659Primary overhaul kit for 700 series pumps. |
KIT700ASAnti-siphon kit for 700 series pumps. |
KIT700MAMeter flange assembly for connecting an 800 series meter to a 700 series pump. |
KIT900PFMeter flange assembly for connecting an 900 series meter to a 700 series pump. |
Digital Inline Turbine Meters From Fill-Rite
Rugged. Accurate. Compact.
Accurate to 1%, this turbine meter sets the standard for accuracy, ease of use and safety. Compatible with gasoline, diesel, kerosene, jet fuel, heptane, and mineral spirits (aluminum version). It comes with the UL/ATEX listing on the entire meter, not just the electronics as competing brands have.
Each meter is built to handle flow-rates between 2-35 GPM and operate in temperatures between -40 F and 176 F.
Install it where you need it, even at the end of the hose. Measure gallons, liters, quarts, pints, and ounces. For a robust meter you can depend on, choose Fill-Rite, the most trusted name in pumps and meters.
Loaded With Features!
- Powered by (2) AA replaceable batteries
- Rubber boot to protect meter from impact damage
- Factory presets are pre-loaded for 20 fluids
- Compact, lightweight design makes it perfect for multiple applications
- Available in nickel plated aluminum for biofuel applications
- Backup memory to restore data when batteries expire
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Related Products
Chat with Us
