English
Arabic
Product Description
Keep the kids cool!
Don't get caught in a hot car.
|
|
|
|
|---|---|---|
Do-it-yourself!An easy 5 step process that takes 10-15 minutes. |
Have it when you need it.Make sure your car ac is blowing cold during those summer hot months! |
Features
|
Mr. Freeze for automobiles + Accufill Technology
Mr. Freeze is for automobiles and uses AccuFill Technology to measure the temperature coming from your car vents.
Mr. Freeze is for automobiles and uses AccuFill Technology to measure the temperature coming from your car vents while you are filling. The digital vent temperature display allows you to quickly and easily determine and reach the optimal target vent temperatures to get your AC blowing cold again. In addition, Mister Freeze contains lubricant and leak sealer to help lubricate and seal your system ensuring that your AC stays at peak performance.
- Measures temperature unlike the traditional way of measuring pressure
- Easy to use. Cool air in 10 - 20 minutes.
- More accurate and easier to control fill resulting in less overfill
- Works on most cars
- Contains leak sealer & lubricant * Doesn't seal all leaks
More tips for using Mr. Freeze AC Revitalizer
|
|
|
|
|
|---|---|---|---|
22 Ft Max DistanceUp to 45 seconds for temperature reading or pairing. The digital reader has a built in timer that shuts off the probe after 10 minutes to conserve battery. |
Wireless Vent ClipWireless vent clip: Interior vent sensor transmits real-time temperature reading eliminating the need to leave the engine bay. |
Your unit should come with the sensor inside of the digital monitor. |
Remember to pull up on the coupler then push down into the low pressure service port until you hear a click indicating a secure fit. |
Do-It-Yourself Easy! Cold air in minutes.
|
|
|
|
|
|---|---|---|---|
Step 1Read all information, instructions & warnings before using this product. Put on safety goggles and gloves for safety then remove red tabs and sensor from the adapter. Remove the battery tab from the sensor. |
Step 2Clip the sensor on the center-most vent in your car. Turn on your digital display at or near your low side service fitting by the engine compartment. Red light indicates "on". “---” indicates acquiring signal. Note: Connection time may vary, please allow up to 45 seconds for connection. |
Step 3Get prepared to fill your system by opening the hood and placing the coupler on the low pressure port. This is the only port that the coupler will fit on. To attach the coupler, pull up on the coupler then push down into the low pressure service port until you hear a click indicating a secure fit. Turn on your engine, put the handbrake on, and turn your A/C and fan to max. |
Step 4Fill your system in 10 second bursts while rotating can every 3-5 seconds. Give your system a little time to update and check the temperature gauge against the ambient temperature outside before adding another burst to your system. |
Wireless Digital Monitor
Conveniently measures vent output temperature, not pressure.
Target Temperature Reading
THE TARGET VENT TEMPERATURE IS -17ºF TO -23ºF TO THE AMBIENT TEMPERATURE.
For Example, If outside temp is 80°F, target display temp should read between 57°F to 63°F which is -17°F or -23°F below outside temp.
DO NOT OVERFILL. When nearing target temp, charge slowly. Give your system a little time and check the temperature gauge against the ambient temperature outside before adding another burst to your system.
Keep away from direct sunlight and other sources of heat.
WARNING: DO NOT connect quick coupler to high side service port or any a/c system with pressure higher than 170 PSIG.
Contents under pressure. DO NOT intentionally vent refrigerant into atmosphere.
WARNING: Contains: 12 oz. R-134a Refrigerant(1, 1, 1, 2 Tetrafluoroethane, CAS #811-97-2) & 2 oz. of synthetic lubricant enhancer with leak sealer. Can burst if heated.
Caution:
- Accufill Trigger is meant as a one time use product.
- Store in cool place. Long term storage may result in battery discharge.
- Always wear safety goggles and cloth-lined rubber gloves when handling this product.
- All used & unused product must be disposed of in accordance w federal, state and local regulations.
- USE ONLY WITH SYNTHETIC OIL.
- KEEP OUT OF REACH OF CHILDREN.
- DO NOT overcharge a/c system as this will cause unit to shut down or fail.
- Repair all major leaks before charging.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Related Products
Chat with Us
