English
Arabic
From the manufacturer
Control Your Sound
Make your own music rules with the Planet Audio Anarchy AC1500.1M Monoblock Class A/B Amplifier. With 1500 Watts Max Power and MOSFET power supply, this Amplifier lets you set your audio experience. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud.
- Class A/B, Monoblock, MOSFET power supply
- 1500 Watts @2-Ohms x 1 channel Max Power, 750 Watts @4-Ohms x 1 channel
- High and low level inputs
- Thermal overload speaker and short protection
- Variable low pass crossover, Variable bass boost
- Input sensitivity selector, Variable input gain control
- Dimensions: L 10 x W 10 x H 2.4, Weight: 6.8 Lbs.
- Remote Subwoofer Control, Power and protection LEDs
|
|
|
|
|
|---|---|---|---|
MOSFET Power SupplyMetal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output. |
Class A/BOur Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency. |
2 Ohm Stable2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume. |
High and Low Level InputsHigh-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units. |
|
|
|
|
|
|---|---|---|---|
Variable Low Pass FilterVariable low-pass filter gives you control over the frequencies that pass through to the subwoofer. |
Bass BoostVariable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it. |
Subwoofer Level ControlA wired remote lets you easily control the subwoofer level for customized output and superior sound. |
Short ProtectionAutomatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short. |
Power Input Terminals
When installing all Planet Audio amplifiers, it is important to use the MAXIMUM gauge of wire that the power terminals will accommodate. For instance, if an amplifier has 4 gauge power and ground terminals, use high quality 4 gauge multi-strand copper wire to make your power connections. This maximizes the amplifier’s ability to draw the required power upon demand. This also helps prevent overheating that could cause failure. ALWAYS make sure your vehicle’s electrical system is capable of handling the current demands from any after-market accessory.
Please refer to the amplifier’s owner’s manual for correct wire gauge sizes.
Fuses
Fuses protect BOTH the amplifier and the electrical system of your vehicle from faulty conditions.
If you must replace a fuse on the amplifier, always use a fuse of exactly the same type and rating of the one you are replacing. A different type of fuse or rating may result in damage or cause a fire. Please refer to your owner’s manual for reference on fuse size and type.
If you plan on using multiple amplifiers in your system, be certain that you have the appropriately sized gauge wire to accommodate the current demands for all amplifiers and that the wire is fused correctly at the battery. Connect an empty fuse holder within 18" (45 cm) of the car battery and run a 4 gauge (or heavier) cable from this fuse to the amplifier location. A fused distribution block is recommended when using several amplifiers or accessories.
Proper Grounding
Proper grounding is essential for any electric accessory in a vehicle.
Some key points to remember: Keep the ground as short as possible. Connect the amplifier’s power ground terminal to the closest point on the chassis of the car. Keep this ground wire to less than 39" (100 cm) in length. Use 4 gauge (or heavier) wire. Scrape any paint away, use a star washer to “bite” into the metal and secure it tightly using a grounding lug.
Any steps that aren’t followed properly will result in a higher resistance at the ground point, causing unnecessary heat, high current draw, and potentially damaging the electrical accessories in the vehicle.
Gain / Input Sensitivity
The “Gain” or “Input Sensitivity” selectors on an amplifier are not to be mistaken for a volume setting. This setting allows users to match the gain from the source unit.
To set these selectors properly, you must “defeat” any processing on your source unit. In other words, make sure Bass, Treble, and Subwoofer levels are set to “0” on your source unit before adjusting the gain or input sensitivity selector on your amplifier.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Related Products
Chat with Us
